DISCLAIMER: This unit is intended for LEGAL purposes only, to be used in accordance with local laws and ordinances. Use only in extremely well-ventilated areas. DO NOT USE INDOORS
*Note: Column capacity may vary depending on the biomass density, moisture content and column packing density. Capacity is calculated using the industry standard of 4.2g/in3. This is the upper limit for column capacity. Low density, uncut, heavily dried, and/or lightly packed material can reduce capacity by 50%. For best results, we recommend to tightly pack coarse ground material.
Shop Dewaxing Closed Column Extractor
Key Features and Description:
Dewaxing Spool Included for filter out and coagulating waxes and lipids.
Compound Gauge with (-30)-160 PSI readout.
Closed Column Pressure Extractor (Comes with 1 yr. Limited warranty, excludes gaskets and screens)
This system allows the user to build up solvent pressure by closing the valve, pulling a vacuum and filling the extractor, Extractor will fill about 85% with solvent before the internal pressure will equal the pressure of the can propellant.
The solvent can will fit into either port with a tip adapter supplied with some butane cans, tip adapter required, not included
Solvent Soak is expected to be between 30-90 min, but this all depends on material, starting with frozen cans of solvent is recommended
This system allows the user to soak the material before opening the bottom valve to release the solvent and oil.
ProfessionalKit Adds the following:
Compound Gauge
Sight Glass
Shower Head
ExplorerKit Automatically Includes:
8″ x 8″ Platinum Cured Silicone Non-Stick Pad
1.5″ Dewaxer Tri-Clamp 304 Stainless Steel Material Tube
Dewaxer Spool Sizes Specifications:
1.5″ x 12″ Dewaxer = 90G
1.5″ x 18″ Dewaxer= 135G
1.5″ x 24″ Dewaxer= 180G
1.5″ x 36″ Dewaxer = 270G
304 Stainless Steel Flare End Caps with Heavy Duty Stainless Steel Miniature Ball Valves
1/4″ Stainless Steel MNPT Drain Plug
(1) 1.5″ Standard Pressure Tri-Clamp Clamps
1.5″ Tri-Clamp Quadpod
(2) Buna-N Tri-Clamp Gaskets
Buna-N 100 Mesh (150 Micron) Gasket
***Note: Parts and components can be subject to substitutions. Any substituted parts will have the same function and will be of equal or greater value.****
Cylinder Volume
1.5″2″3″4″6″8″10″12″
Select Material
How Much Will Fit in Cylinder
Formula Volume x Weight of Water x Specific Gravity
Constants Weight of Water = 0.0360 (lbs / in3) Specific Gravity of =
