Gorilla SprayAdhesive is heavy duty, multi-purpose and easy to use. Gorilla SprayAdhesive forms a clear, permanent bond that is moisture resistant and can beused on projects both indoors and out. This spray adhesive is also photo safe.Its wide pad nozzle and controlled, fine mist spray provides an evenapplication on the project you are working on.
Directions:
All surfaces should be clean and freeof dirt, grease and oil. Protect surrounding areas from overspray to avoidresidual adhesive.
Shake can well before using.
Hold the can 6 to 8 inches fromsurfaces to be bonded and spray an even coat of adhesive.
For Maximum Bond Strength: Sprayboth surfaces to be joined. Allow to dry to tack (approximately 1 minute)and press surfaces firmly together. For Repositionable Bonds: Spraya light even coat on one surface. Allow to dry 1-3 minutes before joining.Repositionable up to 10 minutes depending on surface type, then bondbecomes permanent. To remove, gently peel from corner. Tip: Toavoid possible clogging, turn can away from body, turn upside down andspray a short jet of clear gas after completing the job.
*Not recommended for use on vinylmaterials, automotive headliners, polypropylene, polyethylene or similarmaterials. Do not use for bonding weighted materials.
